Omni Pannier Clips MK-II
Im selling these clips 3D prints files at: https://cults3d.com/en/3d-model/gadget/omni-pannier-clip
I developed these clips to attach itself onto most fabric reusable shopping bag/tote bag of different sizes, turning them into useful bicycle panniers. Increasing the versatility of these bags. Just clip-on and tighten the screws, no cutting or damage to your bag.
Require the uses of:
3 x M6 Bolt Screw(16mm or 20mm)
Omni Pannier Clip MK-II with Cover Type A; Default Setup
Omni Pannier Clips MK I
Omni Pannier Clips MK-II + Clips Attachment
Steps on how to attachment the clips to your bags.
Works with normal Reusable Shopping Bag - 3 Clips
Self tested the load limits, with just 2 of these clips, you can carry around 5kg of grocery(a 5kg bag of rice).
The 3rd clip can be reattached onto your bag handle to extend its hold.
Works with normal Free Tote Bag too!
Version 1.0 - Work proper;y with shopping bag but need to cut holes on the bag and zip tie them together. Zip ties tear bag a little when going over bumps and the hook broke after inserted onto the rack at a wrong angle. Broke in pieces.
Version 5.2 - Redesign with thicker body and hook, give zip tie better hold on the bag, no tearing. Broke after inserting at a wrong angle.
Version 6.0 - Rework on hook to work with my bungee cord, removing zip tie completely. Doesn't work at all, doesn't hold the bag at all. Failed
Version 7.0 - Rework holding mechanism with holding bolt & screw. Doesn't hold at all. Failed
Went back to the drawing board. Look through my idea of attaching things to bag without any Zip tie or cutting. Going to throw my Hook design and a Bag resealer together.
Version 8, 9, 10, 11 - Redesigning and Reworking clip holding mechanism. Everything broke, Failed; Everything broke but the Hook on version 11 was good, fabric went into the hook nicely.
Version 12.4 - Combine my best design from Ver5 and rework the hook into the design. Hold with Screw and Bolt. Miniaturize and Clip and Hold system. Success!